If the marking of implants or other components was always trivial, the WeStore 40r would not be needed. However, practice shows that certain components can only be marked individually due to the high demands on the marking or the complex geometry. In order to meet these requirements, the WeStore 40r is equipped with a 6-axis robot, which retrieves the pallets from the 40-fold storage. Alternatively, entire pallets can be loaded as with the WeStore 20 or, the workpieces can be fed individually to the FOBA laser machine.

As an option, the WeStore 40r can be equipped with an automatic gripper change to mark different workpieces one after the other without any changeover effort. If a rotationally symmetrical workpiece is to be marked on the circumference, the component is loaded directly into the FOBA lathe chuck. Additional process steps such as visual inspection with cameras can be integrated into the WeStore40r automation cell. If desired, the part feed can also be designed as bulk material feed.